TV Stand- Refinishing, Distressing, Antiquing

I bought this dresser off KSL – (Utah’s version of Craigslist) – for $80.  I then got to work.

Here is how I transformed this dresser into my TV stand

I started by going into one of my favorite Utah furniture stores that specializes in painting wood furniture.  They helped me pick out the paints I wanted and gave me a few tips on how to tackle this project.  I want to share these tips with you and more that I learned from trial and error

The first thing you want to do when refinishing a piece is sand.  I used a #220 grit sand paper to sand this baby down.  Since I was painting the whole piece I didn’t worry too much about getting all the way down to the wood (except in the areas I wanted to see a more distressed look).  I made myself a little map of where those areas were before I started to paint.  You really just need to sand enough for the paint to have something to stick to.  After sanding, I then wiped down piece completely to get rid of dust.

I then applied a thin coat of paint with a foam brush (this helps to minimize brush strokes and get a more even layer) I let this dry about 5-6 hours, then I used my #220 grit sand paper to lightly sand again.  I made sure to look back at my distressing map to sand those areas extra well.  Wiped it down again and painted again.  Repeating these steps until the grain of the wood was no longer visible.

After the brown paint was done being applied I used a #150 grit sand paper for extra distressing.  I wiped it down and added in my pops of baby blue, green, and teal.  I used the foam brush and an art paint brush to cover the small areas.  I sanded down the distressed areas onces more with my #220 and #150 sand paper.

I then added a dark brown glaze over the top of the whole piece. I let this dry for 2 days.

Finally I added a top coat. I very lightly sanded/buffed the piece with #600 grit sand paper. Wiped it again.  Then following the directions on my top coat can, began to apply it with a foam brush.  I let it dry a day, then sanded, wiped, brushed on the top coat again.  I did this three times.  Then I was done!  This took about a month for me from start to finish.  I was more work than I thought, but it turned out great.

More  Tips!

Remember to stir the top coat.  Do not shake it or that will create bubbles.

Use an actually glaze not a stain to go over your piece for the antiqued look.  Stain will wipe off as you add your top coat.  Very frustrating.  Don’t listen to anyone who tells you to use a stain over a layer of paint.  It doesn’t stay on.

Foam brushes work great, buy them from Micheal’s.  They are better quality there than Home Depot.

Flow-trol also is great for smoothing out paint brush lines.  Just add it to your paint can.

I took out the top two drawers to store our TV components and I spray painted the handles.

I hope these tips help you with your next project!

Done piece!

Dresser Re-do!

I bought this dresser on Craigslist.  I sanded it, primed, and painted it. I spray painted the handles off-white.

This is how it turned out!

I still need to add that last handle.  But, I think it turned out perfect!

Painting Tips from Lynn

Sorry its been forever since I have posted anything.  I always think summer is going to slow things down, but nope!  Seems to have gotten crazier at our house.  Anywho, you clicked on this little post because you want to paint something!  Love it!  Paint gives new life to some many things.  Your kitchen cabinets, furniture, walls… you name it.  A friend sent me an e-mail today, asking if I knew how to help reduce paint brush strokes.  I thought, BLOG IT!  Hahaha… After our house flooded a few years ago, we have just about repainted every wall, ceiling, and cabinet door in this house.  (I also love to buy furniture off craigslist and fix it up!  I have to say this quietly b/c the hubbs is not really a fan of me bringing home stray furniture. shh…) 

Tips! (these are from trial and error, paint service desk people,  and from Aunt Kathy my paint go to lady)

Number 1! When painting your cabinets or furniture, to reduce the brush strokes use a product called Floetrol.  You mix it into your paint and it helps smooth things out.  If you want things really smooth you will have to rent a sprayer.

Number 2 Primer!! Use one, they help a ton.  And when you are painting something dark, have the paint guys tint it gray for you.  That will save you time and money!

Number 3 This goes with number 2, but Kilz really is the best primer/stain blocker there is.  I had a stain on my front door, I used two other primers before trying Kilz.  It was the only on that the stain didn’t leak through.

Number 4 If you use a water-based paint and then need to use a clear coat of varnish to help it stay strong, MAKE SURE that the varnish is also water-based or it will yellow over time.  Same with oil paint= use oil-based varnish.

Number 5 Lowes and finally Home Depot have little 7 ounce cans that you can buy.  These are great for testing a color in a room.  And DO test it out BEFORE painting.  You will be happy you did.  Nothing worse that painting an entire room than hating the color.  Trust me…I still need to repaint Beck’s room, but it’s not going to happen anytime soon.  Oh!  and don’t just paint a little stripe of color on one wall, do a 10×10 square on a few walls.  Color will look different on each wall depending on how the light hits each wall.

Number 6 My latest experiment-Stripes!  When painting stripes, first paint your main wall color.  Then tape off the stripes you want using the fine blue painters tape.  Then use main wall color again to go over  tape just a little to cover any gaps between the wall and the tape, so stripe color doesn’t leak under tape.  Let that dry then paint stripes.  Let dry and then remove tape.  Stripes are so pretty and a great way to add interest to a room.  I will post some  more pictures when I finish my room.

Number 7 Paint architectural details, people in magazines and on TV design shows are always saying this, but it really adds to a room.  Check out my cool window.  I painted the inside lip brown and the outside a light tan popping off the gray walls.  I love it.

Number 8 I should have put this one up by the furniture/cabinet stuff, but sand as best you can then wipe clean before priming.  You don’t have to sand everything off or strip paint before you paint.  Yes, it helps and is a must if you are staining the wood.  But other wise just sand a bit so the paint has something to stick to and use a really good primer.  You will be set.

Number 9 Don’t be afraid of dark colors or painting your ceiling.  I just painted my bedroom.  Gray walls, gray/blue ceiling, and chocolate brown fire place.  It so beautiful.  My husband was a little nervous the ceiling would look low and make the whole room very dark.  But, now that it is all done, it is so inviting and pretty :).  Paint your ceiling! (warning neck may hurt and paint may fall in eyes, just to let you know:))

Number 10 If you want the lines where your ceiling and walls meet to be perfect; get over it, hire someone else, or…use a little art paint brush to tidy up any bumps.

Number 11 Buy good brushes. Clean them good when you are done.  Brushes can be expensive, but if you have more than one project and take good care of them; it will be worth it to pay a few more dollars.

I know I have more tips, but that’s all I can think of right now.  Feel free to post a question or e-mail me and I will try to answer your painting questions the best I can.  And have fun!! It is so nice to give new life to a room or peice of furniture.  You will feel so good when you finish!  Get Painting with Your Bad Self! I will post before and after pics of my room when I finish the molding and everything.

« Previous Page